To clean cabinet hinges, start by unscrewing the hinges from the cabinet doors and removing them.

Then, fill a pot with enough water to cover the hinges and add a tablespoon of dish soap.

If the hinges are particularly dirty, you can also add a tablespoon of white vinegar and baking soda.

How do you clean metal kitchen cabinet handles?

For the maintenance of coated handles, a mild solution of warm water and appropriate detergent is suggested. All surfaces of the handle should be cleaned, using a soft cloth or brush and dried thoroughly.

How do you clean old furniture hardware?

You will have to go over the metal a few times if the metal piece of hardware had a lot of build up. Add more water and metal cleaner as needed. If you are using the baking soda and vinegar method, dip your toothbrush in a bowl of vinegar and use that to buff the baking soda mixture on the metal.

What is the best way to clean cabinet hardware?

Vinegar Cleaning Solution

  • Pour 1/2 cup distilled white vinegar and 1/2 cup water in a spray bottle and shake the bottle to mix.
  • Spray a rag with the vinegar solution until it is damp but not dripping.
  • Wipe the hardware with the vinegar-soaked cloth.
  • Buff the hardware with a dry chamois cloth for a nice polish and sheen.

How do you remove tarnish from cabinet hardware?

Unscrew the screws on the back of the copper cabinet hardware using the appropriate type of screwdriver.

  1. Mix a 50/50 solution of white vinegar and water and place it in a plastic bowl.
  2. Scrub each copper cabinet hardware piece with a soft-bristled scrub brush to remove dirt and grime from the surface of the hardware.

How do you clean tarnished cabinet handles?

Mix 1 tablespoon of ammonia with 1 pint of water. Wipe chrome and steel knobs with this solution and soft rag, buffing them until the tarnish and dirt is dissolved. Rinse with clear water and wipe dry with a clean rag.

How do you clean metal kitchen cabinets?

How to Clean Metal Cabinets

  • Use a vacuum with a nozzle to remove the dirt and loose residue inside the cabinet and shelving.
  • Use rubbing alcohol on a clean cloth to remove any buildup of oil, grease and dirt that is on the surface.
  • Use very fine steel wool to gently remove rust spots or areas.

How do you clean metal drawer pulls?

Make a paste by dissolving a teaspoon of salt in 1/2 cup of vinegar and mixing in flour. Use the paste to rub dirt and discoloration from contours and corners and to polish the drawer pulls. Rub with a non-abrasive cloth to avoid scratching the metal. Clean the residue with another cloth.

Photo in the article by "Flickr" https://www.flickr.com/photos/bensutherland/4928332668